Hero, Black bar

A 4″ room controller for the wall. It runs the Inspinia application on Linux, measures room humidity and temperature on board, and takes power and network over one PoE cable or 24 V DC.

IPS · 480 × 480
4″
BMS points
1000
UI objects
200
Max. consumption
5 W

At a glance

Square 4″ IPS

480 × 480 at 400 cd/m², with a five-point capacitive touchscreen.

Room logic on board

Linux 3.4 with the Inspinia application: up to 200 UI objects and 1000 BMS points. Initial licence 200 BMS points.

Measures the room

Built-in humidity (0–100% RH) and temperature (−40 °C to +125 °C) sensors.

PoE or 24 V DC

IEEE 802.3af on the LAN port, or 24 V DC in. Maximum 5 W.

Specification

As published in the datasheet.

Hardware and software

Processor
ARM A7 single-core 1.2 GHz
Memory
128 MB DDR3 RAM
Storage
2 GB SD flash
Software
Linux 3.4 with the Inspinia application
Capacity
Up to 200 UI objects and 1000 BMS points
Initial licence
200 BMS points · no HVAC (VRV/VRF) points

Display

Panel
IPS 4″
Resolution
480 × 480
Luminance
400 cd/m²
Touch
5-point capacitive

Power

Input
24 V DC
PoE
IEEE 802.3af
Consumption
Max. 5 W

Standard interfaces

LAN
1× RJ45 10/100 Mbps (PoE)
Add-on
1× add-on port
Digital out
1× (5 V DC)
Digital in
1×

Built-in sensors

Humidity
0% to 100% RH
Temperature
−40 °C to +125 °C

Environment

Operating temperature
−10 °C to +60 °C
Operating humidity
5% to 90% at 25 °C

Rear terminals

The terminal bank is on the back of the panel and must remain reachable in the back box.

12345
  1. Add-on bus− · +
  2. 24 V DC+ · −
  3. EthernetRJ45 10/100 Mbps · PoE 802.3af
  4. I/O (5 V DC)C · 5V · I
  5. Add-on portOptional interface module

Integrations

Optional interface modules fit the add-on port and bring the building’s buses and climate systems onto the same controller.

  • KNXA-KNXKNX TP
  • bticinoA-SCSBticino (SCS) TP
  • iNELSA-iBUSiNELS Bus TP
  • ModbusA-GRS4Galvanic isolated RS485 Modbus
  • VRFVRV / VRFOne add-on per AC brand · order codes below
  • ZigbeeA-ZGBZigbee 3.0

VRV / VRF port connection

BrandOrder codePortsProtocolIDUODU
DaikinA-VDKF1 · F2D3 NET6416
Hitachi · HisenseA-VHT1 · 2TCC LINK6416
LG · ArçelikA-VLGA · BINTER A-B64—
Mitsubishi ElectricA-VMEM1 · M2M-NET (TB3/7)5010
Mitsubishi HeavyA-VMHA · BSLINK I/II64—
Panasonic · SanyoA-VPAU1 · U2S3 NET64—
SamsungA-VSM-FF1 · F2 / R1 · R2NASA6416
ToshibaA-VTOU1 · U2TCC LINK6416

Indoor (IDU) and outdoor (ODU) unit counts are subject to limits set by the manufacturer. VRV/VRF add-ons always operate as the primary master central controller.

Bus connection

BusPortsProtocol
iNELS+ · −iNELS Bus
KNX+ · −KNX TP
ModbusA · B · GRS485
bticino+ · −SCS Bus

Dimensions and mounting

Front
92.00 × 92.00 mm with metal frame
Back box
EU standard 1G, round · Ø 72.50 × 68.00 mm · 61.00 mm deep
Mounting plate
74.00 mm · screw pitch 60.00 mm
Installation
Box face flush with the finished wall
9292
Front, with metal frame · mm
72.572.5
Back box, EU 1G round · mm

Ordering and documents

  • INS4SQInspinia SQ 4″ Room Controller

The metal frame is an optional trim: without frame, Silver, Gold or Black.

Start with the specification.

Send the protocol, the room count, and the panel sizes. We reply with a specification.

Request a quoteFind a certified installer