Inspinia 8″ SQ
INS8 SQ · Touch panel
An 8″ touch panel for the wall, used horizontally. It runs the Inspinia application on Android 7.1, carries two speakers, a microphone input and dry-contact outputs, and takes power over PoE (802.3at) or 24 V DC.
- IPS · 1280 × 800
- 8″
- BMS points
- 2000
- UI objects
- 1000
- Max. consumption
- 12 W
At a glance
8″ IPS, 1280 × 800
300 cd/m² with five-point capacitive touch, in horizontal working mode.
The building on one screen
Quad-core 1.2 GHz, 1 GB RAM, 8 GB flash. Up to 1000 UI objects and 2000 BMS points; initial licence 500 BMS points.
Audio on board
Two 2 W speakers and a microphone input.
Contacts and infrared
Five digital inputs, two dry-contact outputs (2 A / 24 V DC) and a Uni-port for the optional six-LED infrared module.
Specification
As published in the datasheet.
Hardware and software
- Processor
- Quad-core 1.2 GHz
- Memory
- 1 GB DDR3 RAM
- Storage
- 8 GB NAND flash
- Software
- Android 7.1 with the Inspinia application
- Capacity
- Up to 1000 UI objects and 2000 BMS points
- Initial licence
- 500 BMS points · no HVAC (VRV/VRF) points
Display
- Panel
- IPS 8″
- Resolution
- 1280 × 800
- Luminance
- 300 cd/m²
- Touch
- 5-point capacitive
- Orientation
- Horizontal working mode
Power
- Input
- 24 V DC
- PoE
- IEEE 802.3at
- Consumption
- Max. 12 W
Standard interfaces
- LAN
- 1× RJ45 10/100 Mbps
- Add-on
- 2× add-on ports
- Digital in
- 5×
- Digital out
- 2× dry contact, 2 A / 24 V DC
- Uni-port
- 1×
- Audio
- 2× 2 W speakers · 1× microphone input
Built-in sensors
- Humidity
- 0% to 100% RH
- Temperature
- −40 °C to +125 °C
Environment
- Operating temperature
- −10 °C to +60 °C
- Operating humidity
- 5% to 90% at 25 °C
Connections
The connector bank sits on the underside and must remain reachable after installation.
- 24 V DC⏚ · + · −
- EthernetRJ45 10/100 Mbps
- OutputsO1 · O1 · O2 · O2 — dry contact 2 A / 24 V DC
- InputsI1 – I5 · C
- Uni-portIRGW-UP infrared · 6 IR LEDs
- Add-on bus port 1A · B · C
- Add-on bus port 2A · B · C
Integrations
Optional interface modules fit the add-on port and bring the building’s buses and climate systems onto the same controller.
A-KNXKNX TP
A-SCSBticino (SCS) TP
A-iBUSiNELS Bus TP
A-GRS4Galvanic isolated RS485 Modbus
VRV / VRFOne add-on per AC brand · order codes below
A-ZGBZigbee 3.0
- IRGW-UPInfrared · Uni-port, 6 IR LEDs
VRV / VRF port connection
| Brand | Order code | Ports | Protocol | IDU | ODU |
|---|---|---|---|---|---|
| Daikin | A-VDK | F1 · F2 | D3 NET | 64 | 16 |
| Hitachi · Hisense | A-VHT | 1 · 2 | TCC LINK | 64 | 16 |
| LG · Arçelik | A-VLG | A · B | INTER A-B | 64 | — |
| Mitsubishi Electric | A-VME | M1 · M2 | M-NET (TB3/7) | 50 | 10 |
| Mitsubishi Heavy | A-VMH | A · B | SLINK I/II | 64 | — |
| Panasonic · Sanyo | A-VPA | U1 · U2 | S3 NET | 64 | — |
| Samsung | A-VSM-F | F1 · F2 / R1 · R2 | NASA | 64 | 16 |
| Toshiba | A-VTO | U1 · U2 | TCC LINK | 64 | 16 |
Indoor (IDU) and outdoor (ODU) unit counts are subject to limits set by the manufacturer. VRV/VRF add-ons always operate as the primary master central controller.
Bus connection
| Bus | Ports | Protocol |
|---|---|---|
| iNELS | + · − | iNELS Bus |
| KNX | + · − | KNX TP |
| Modbus | A · B · G | RS485 |
| bticino | + · − | SCS Bus |
Dimensions and mounting
- Front
- 225.00 × 133.00 mm
- Depth
- 61.20 mm at the body · 64.90 mm overall
- Back box recess
- 243.00 × 149.00 mm
Ordering and documents
- INS8SQ.SSilver bars
- INS8SQ.GGold bars
- INS8SQ.BBlack bars
- Code pendingPink, Copper, Bronze, Red
The finish is the brushed aluminium side-bar trim; the panel is the same.
- DatasheetDatasheet — Inspinia 8″ SQ, opens in a new tab
- ConformityCE
Also in touch panels
- Inspinia 4″ SQINS4 SQView product
- Inspinia 10″ SQINS10 SQView product
Start with the specification.
Send the protocol, the room count, and the panel sizes. We reply with a specification.